AR680W boot log

U-Boot 1.1.3 (Dec 11 2006 - 17:41:28)

U-Boot code: 40780000 -> 4079ABDC BSS: -> 407B4000
System Memory Map:
0x00000000-0x01FFFFFF: SDRAM Bank 0
0x19C00000-0x1E7FFFFF: Memory Mapped IO Space-AHB
0x19C00000-0x19C1FFFF: Static/SDRAM Memory Controller
0x19C40000-0x19C5FFFF: Interrupt Controller
0x19C60000-0x19C7FFFF: AHB Arbiter
0x19C80000-0x19C9FFFF: MAC 0
0x19CA0000-0x19CBFFFF: MA1 0
0x1E700000-0x1E71FFFF: HDMA
0x1E800000-0x1EFFFFFF: Memory Mapped IO Space-APB
0x1E800000-0x1E81FFFF: Timer 0/1/2/3
0x1E840000-0x1E85FFFF: UART 0
0x1E880000-0x1E89FFFF: SPI
0x1E8A0000-0x1E8BFFFF: GPIO 0
0x1E8C0000-0x1E8DFFFF: WDT
0x1E8E0000-0x1E8FFFFF: SCU
0x1E940000-0x1E95FFFF: ACI0(PL040)
0x1E960000-0x1E97FFFF: ACI1(PL040)
0x1F000000-0x1F7FFFFF: Flash Bank 0
0x40000000-0x41FFFFFF: SDRAM Bank 1
RAM Configuration:
Bank #0: 40000000 16 MB
Board: 5VT1310-EVB-V1.4(CPU Speed 297 MHz)
AM29LV320B = 4MB; start at 0x1F000000;
Flash: 4 MB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
## Booting image at 1f020000 ...
Image Name: 7zip Linux Kernel
Image Type: ARM Linux Kernel Image (7zip compressed)
Data Size: -1 Bytes = 4096 MB
Load Address: 40008000
Entry Point: 40008000
Uncompressing Kernel Image ... OK

Starting kernel @40008000...

Linux version 2.6.17.6 (joanw@enzo) (gcc version 4.1.1) #1 Wed Jun 13 15:50:41 CST 2007
CPU: ARM926EJ-Sid(wb) [41069265] revision 5 (ARMv5TEJ)
Machine: 5VT13XX
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists
Kernel command line: root=/dev/mtdblock0 ro rootfstype=squashfs cpufreq=300M mem=16M console=ttyS0,38400
PID hash table entries: 128 (order: 7, 512 bytes)
Timer1 load register: 743423(0xE0000010)
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 16MB = 16MB total
Memory: 13808KB available (1776K code, 383K data, 80K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
PCI: Scanning bus...
PCI: FV Host Bridge - header fixup
PCI: bus0: Fast back to back transfers disabled
NET: Registered protocol family 2
IP route cache hash table entries: 128 (order: -3, 512 bytes)
TCP established hash table entries: 512 (order: -1, 2048 bytes)
TCP bind hash table entries: 256 (order: -2, 1024 bytes)
TCP: Hash tables configured (established 512 bind 256)
TCP reno registered
NetWinder Floating Point Emulator V0.97 (double precision)
squashfs: version 3.0 (2006/03/15) Phillip Lougher
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered (default)
PCI: FV Host Bridge - final fixup
HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x1e840000 (irq = 1) is a 16550A
serial8250: ttyS1 at MMIO 0x1e860000 (irq = 2) is a 16550A
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
NET: Registered protocol family 24
ELBOX physmap flash device: 400000 at 1f000000
ELBOX physically mapped flash: Found 1 x16 devices at 0x0 in 8-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
ELBOX physically mapped flash: squashfs filesystem found at offset 983040
Creating 7 MTD partitions on "ELBOX physically mapped flash":
0x000f0020-0x002a1020 : "rootfs"
0x00020000-0x003d0000 : "upgrade"
0x003d0000-0x003e0000 : "rgdb"
0x003e0000-0x003f0000 : "nvram"
0x00000000-0x00020000 : "U-Boot"
0x003f0000-0x00400000 : "Boot Config"
0x00000000-0x00400000 : "flash"
u32 classifier
ip_conntrack version 2.4 (128 buckets, 1024 max) - 248 bytes per conntrack
ip_conntrack_pptp version 3.1 loaded
ip_nat_pptp version 3.0 loaded
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_time loading
ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/
ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing init memory: 80K
init started: BusyBox v1.00 (2007.06.13-07:50+0000) multi-call binary
Starting pid 81, console /dev/tts/0: '/etc/init.d/rcS'
[/etc/init.d/S03config.sh]
Mounting proc and var ...
Start xmldb ...
[/etc/scripts/misc/profile.sh] get ...
[/etc/scripts/misc/defnodes.sh] ...
[/etc/defnodes/S10setext.sh] ...
PHP [/etc/defnodes/S11setnodes.php] ...
PHP [/etc/defnodes/S12features.php] ...
PHP [/etc/defnodes/S13flashspeed.php] ...
[/etc/defnodes/S14wps_upnp.sh] ...
PHP [/etc/defnodes/S20setnodes.php] ...
PHP [/etc/defnodes/S40brand.php] ...
[/etc/scripts/misc/defnodes.sh] Done !!
[/etc/templates/timezone.sh] ...
[/etc/templates/logs.sh] ...
[/var/run/logs_run.sh] ...
Inserting modules ...
Using /lib/modules/fvmem.ko
fvmem: module license '5VT' taints kernel.
FVMEM version 1.00
Using /lib/modules/fvmac.ko
FVMAC version: 1.07, date: 2007/03/05 (compiled at 15:54:17, Jun 13 2007)
FVMAC 0: FVMAC core w/AMBA at 0xf0080000 IRQ 7
Randomize lower 3 bytes of the MAC address.
FVMAC 0: MAC address <>
FVMAC 0: registered_netdev() as eth0.
FVMAC 1: FVMAC core w/AMBA at 0xf00a0000 IRQ 8
Randomize lower 3 bytes of the MAC address.
FVMAC 1: MAC address <>
FVMAC 1: registered_netdev() as eth1.
Using /lib/modules/fv13xx_access.ko
FV13XX Access Init.
Using /lib/mNetwork interface reset count v1.0o
dules/ifresetcnt.ko
eth1: set media mode 100M/full-duplex
eth0: set media mode 10M/half-duplex
[/etc/templates/webs.sh] start ...
[/var/run/webs_start.sh] ...
Starting HTTPD ...
[/etc/init.d/S03config.sh] done!
[/etc/init.d/S10system.sh]
setup layout ...
[/etc/scripts/layout.sh] ...
[/var/run/layout_start.sh] ...
Start router layout ...
device eth1 entered promiscuous mode
start LAN ...
[/etc/templates/lan.sh] ...
br0: port 1(eth1) entering learning state
br0: topology change detected, propagating
br0: port 1(eth1) entering forwarding state
[/var/run/lan_start.sh] ...
Start LAN (br0/192.168.1.1/255.255.255.0)...
Start DHCP server (br0) ...
start fresetd ...
Factory reset time : 3 secs
System reset time : 3 secs
WPS command : [/etc/templates/wps.sh pbc &]
enable LAN ports ...
[/etc/scripts/enlan.sh] ...
!!!!!!!!!!!!!!! TODO [/etc/scripts/enlan.sh] !!!!!!!!!!!!!!
start WLAN ...
[/etc/templates/wlan.sh] start ...
[/var/run/wlan_start.sh] ...
Start WLAN interface ra0 ...
restart WLAN driver ...
interface ra0 does not exist!
rmmod: rt2860ap: No such file or directory
Using /lib/modules/rt2860ap.ko
PCI: enabling device 0000:00:01.0 (0140 -> 0142)


=== pAd = c1c81000, size = 1085572 ===

<-- RTMPAllocAdapterBlock, Status=0
PCI: Setting latency timer of device 0000:00:01.0 to 64
RX DESC ffc1a000 size = 2048
<-- RTMPAllocDMAMemory, Status=0
1. Phy Mode = 9
2. Phy Mode = 9
Antenna RxPath = 3, TxPath = 2
3. Phy Mode = 9
==========>RTMPSetHT
MCS Set = ff ff 00 00 01
Enrollee PinCode = 79358309
Main bssid = 00:1d:6a:f6:ee:3e
Enrollee PinCode = 79358309
<==== RTMPInitialize, Status=0
0x1300 = 00064320
device ra0 entered promiscuous mode
br0: port 2(ra0) entering learning state
br0: topology change detected, propagating
br0: port 2(ra0) entering forwarding state
[/etc/templates/wps.sh] enable ...
Enrollee PinCode = 79358309
GenerateDHPublicKey Success dhkey_len192
start RG ...
[/etc/templates/rg.sh] start ...
[/var/run/rg_start.sh] ...
Using /lib/modules/ip_stun_func.ko
Register STUN module successes!
Using /lib/modules/sw_tcpip.ko
REDSonic turbo net initialized
sendto_unsock(/var/run/portt.unixsocket, flush)
start DNRD ...
[/etc/templates/dnrd.sh] ...
[/var/run/dnrd_start.sh] ...
Start DNRD ...
Notice: caching turned off
Start telnetd ...
start UPNPD ...
[/etc/templates/upnpd.sh] ...
[/var/run/upnpd_start.sh] ...
Starting UPnP ...
[/var/run/upnp_alive.sh] ...
start WAN ...
Set WAN port media type 0
[/etc/templates/wan.sh] start ...
[/var/run/wan_start.sh] ...
DHCP client on WAN(eth0) CloneMAC() ...
start LLD2D ...
[/etc/templates/lld2d.sh] ...
[/var/run/lld2d_start.sh] ...
Start LLD2 daemon ...
[/etc/init.d/S10systStarting pid 708, console /dev/tts/0: '/bin/sh'


BusyBox v1.00 (2007.06.13-07:50+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.

#